Best Commercial Floor Coatings in Boise
April 2, 2025
Choose the Right Commercial Floor Coating for How You Use Your Space
The right system starts with how you use the space.
There’s no such thing as a one-size-fits-all solution when it comes to commercial concrete floor coatings. A high-traffic warehouse doesn’t need the same system as a customer-facing retail lobby or a public restroom. At Spray ’n Coat Painting, we don’t just install coatings—we help you select the right one based on how your space is used day in and day out.
Here's how usage drives our recommendations—and how we make sure you get a floor that holds up, looks good, and makes sense for your business.
Floor Coatings for Warehouses, Shops & Service Bays in Boise
Challenge: Heavy equipment, rolling traffic, forklift wear, oil and chemical spills
Recommended System:
- Base Coat: Industrial-grade epoxy or polyurea
- Topcoat: Urethane for maximum chemical resistance and durability
- Add-ons: Slip-resistant texture or full broadcast chips if needed for traction
Why it works: These systems are designed to hold up under abuse—resisting hot tire pickup, abrasions, and corrosive materials while still being easy to clean.
Floor Coatings for Public Restrooms, Breakrooms & Utility Areas in Boise
Challenge: Frequent cleaning, water exposure, hygiene concerns
Recommended System:
- Base Coat: Seamless epoxy system
- Topcoat: Light-textured urethane or satin finish for easy cleaning
- Add-ons: Cove base to seal wall joints for a sanitary finish
Why it works: Coated concrete is easy to sanitize and resists moisture intrusion that leads to mildew, peeling, and odors. These systems are seamless and bacteria-resistant.
Floor Coatings for Retail Floors, Lobbies & Showrooms in Boise
Challenge: Aesthetic appeal, customer impressions, and daily foot traffic
Recommended System:
- Base Coat: Tinted epoxy or polyurea
- Topcoat: Clear urethane or high-build finish with optional decorative chips
- Add-ons: Custom flake blends to match brand colors or décor
Why it works: These floors look polished, professional, and stay clean with minimal effort. They make a strong impression without sacrificing durability.
Floor Coatings for Storage Areas, Mechanical Rooms & Back-of-House Spaces in Boise
Challenge: Budget constraints, lower visibility, basic protection needs
Recommended System:
- Base Coat: Epoxy-only system for cost efficiency
- Topcoat: Optional clear coat if additional protection is needed
Why it works: This basic system protects the concrete from dust and stains without overbuilding in spaces that don’t require top-tier aesthetics or chemical resistance.
Matching the Right Floor to Your Business in Boise
We don’t start with products—we start with questions:
- What’s this space used for?
- What kind of traffic does it see?
- How often does it get cleaned?
- Does it need to look polished, or just perform?
- What’s your downtime window?
From there, we match the right coating system to your answers. We handle every step—surface prep, grinding, coating, and topcoats—and work around your schedule to minimize disruption.
Final Thought
Concrete coatings aren’t just about sealing a floor—they’re about choosing a solution that fits your operations. The way your business uses the space should guide the system you install. It’s also about protecting your concrete from wear and damage, improving safety with slip-resistant textures, and preserving the long-term value of your facility. A good-looking floor is just a bonus.
Let’s talk about how your space functions and what coating will serve it best. Contact Spray ’n Coat Painting today or fill out a request form to schedule your free on-site estimate.
Full exterior repaint brings new life to a Nampa neighborhood home At Spray ’n Coat Painting, we know that color can completely change how a home feels. For this Nampa homeowner, it was time to say goodbye to the dated tan and bring in something brighter and more cheerful. A full exterior repaint in a fresh pastel green paired with crisp ultra-pure white trim gave this home a lively new look while still feeling timeless in the neighborhood. The Scope Complete exterior repaint with repairs and prep This project involved a full repaint of the siding, trim, fascia, soffits, gutters, downspouts, and doors. Before painting, our crew filled holes along the right side of the home where an old cable had been removed, reinstalled the dryer vent, and backrolled the entire bottom edge of the home for smooth, even coverage. The System Durable coatings and careful prep for lasting results We applied pastel green as the body color, matching the soffits, front door, garage doors, and man doors to keep a clean, consistent look. The window trim, fascia, and gutters were finished in ultra-pure white for a bright, modern contrast. To ensure proper adhesion, we also primed the factory-finished gutters before painting.
A high-performance floor system for a large 2,400 sq. ft. shop We recently completed a floor coating project in Marsing for a homeowner with a spacious 2,400 sq. ft. shop. With a space this large, the homeowner needed a floor that could handle heavy use, resist staining, and still look professional. They reached out to Spray ’n Coat Painting for a better-than-epoxy solution that would be durable, easy to maintain, and visually appealing. Here’s What We Did Surface Prep and Grinding: We started by diamond grinding the entire shop floor to open up the concrete and create a proper surface for adhesion. Any imperfections were repaired to ensure the coating bonded securely. Base Coat and Decorative Flake: Once the surface was prepped, we applied our industrial-grade polyurea base coat, followed by a full broadcast of our popular Keystone chip blend. This decorative flake system not only adds traction but also provides a clean, modern look that complements a wide range of shop uses. Protective Topcoat: To finish, we installed a UV-stable polyaspartic topcoat. This protective layer seals everything in, delivering long-term resistance against abrasions, chemicals, and Idaho’s extreme temperature swings, while also making the floor much easier to clean.
A sleek cabinet makeover with soft-close upgrades and a professionally painted finish When this Meridian homeowner reached out, they had already attempted to repaint their kitchen cabinets on their own—but weren’t happy with how things were turning out. They knew they wanted a crisp, professional look and upgraded functionality. That’s where our cabinet refinishing team stepped in. We refinished all 16 cabinet doors and 14 drawer fronts in a rich charcoal hue, paired with new soft-close micro hinges to give the entire space a polished, high-end feel. The darker tone added contrast and elegance, creating the elevated finish they had originally envisioned. The Scope A full kitchen cabinet repaint with soft-close hardware installation This project included: 16 cabinet doors 14 drawer fronts Removal of old hinges and installation of new soft-close micro hinges All surfaces were cleaned, sanded, primed, and professionally sprayed using our factory-grade cabinet finish system for long-term durability and a beautiful satin sheen. The System A smooth, durable finish designed for everyday use We used a premium 2K waterborne polyurethane system from Gemini that cures harder and holds up better than traditional lacquer finishes. Unlike pre-cat lacquers or conversion varnishes that may yellow or crack over time, this cabinet-grade system resists chipping and stays looking new for years to come.
When CS Beef Packers reached out about coating specific walkways and restroom entry points in their Kuna facility, the priority was clear—improving safety and durability in areas exposed to constant foot traffic. This fast-paced industrial environment required a non-slip solution that could be installed quickly without compromising performance. We were glad to deliver a clean, safe, and long-lasting result. The Scope Strategic surface coating in hallways and entry areas This commercial floor coating project focused on two main hallway sections of approximately 100 square feet each , along with four restroom/locker room entry areas , ranging from 50–65 square feet per section. Our team completed all work in a single Saturday , carefully stopping at natural breaks in the concrete for a seamless finish that blended well with the surrounding flooring. The System Industrial-grade coating built for traction and longevity To ensure long-term adhesion and optimal performance, we followed a multi-step process designed specifically for non-slip protection in commercial environments: Surface Prep : Concrete was aggressively sanded and ground to remove all existing coatings, wax, and surface contaminants. Epoxy Primer/Base Coat : A base layer of epoxy was applied directly to the bare concrete for strong bonding and as the foundation of the system. Quartz Broadcast : We applied a full broadcast of 50/70 mesh quartz sand into the wet epoxy to create a high-traction, textured surface. Topcoat : The system was completed with a light grey epoxy topcoat for added durability, visual clarity, and easy maintenance.
Learn how a Boise commercial painting contractor uses durable paints, coatings, and maintenance services for high-traffic commercial interiors.
Discover the ROI of repainting your commercial building with a Boise commercial painter. Learn how commercial interior painting boosts value and appeal.
Learn how a Boise commercial painting contractor meets OSHA safety standards during painting and coating projects for safe, reliable, and professional results.
Learn the key differences between commercial and residential painting. Discover why hiring a commercial painter in Boise makes sense for business owners.
Spray ’n Coat Painting recently completed a wood door refinishing project for a homeowner in Middleton, Idaho. Over time, their beautiful solid wood front door had faded and weathered from sun exposure—something we see often across the Treasure Valley. But rather than replace the door, the homeowner reached out to us to restore its appearance and match the interior wood tones for a cohesive look inside and out. Here’s What We Did We began by carefully sanding the front door and surrounding trim to remove the worn finish and prepare the surface for new stain. Before proceeding with the full application, we tested a sample stain on a small section of the door to make sure it matched the interior tones. Once approved by the homeowner, we applied stain across the entire door surface while keeping the door in place. After allowing proper dry time, we returned to apply two coats of a UV-stable clear finish. This protective layer will help preserve the color, protect against sun damage, and keep the door looking beautiful for years to come. Why Staining Is Better Than Replacing Many homeowners assume a worn or faded door needs to be replaced—but most solid wood doors just need the right restoration process. Staining not only revives the wood’s natural beauty, but also allows you to better control color tone and finish. It’s a more sustainable and cost-effective way to maintain curb appeal and protect your home’s entryway. Our UV-stable clear coats are especially important in areas like Middleton, where intense sunlight can break down traditional sealants and finishes over time.
