Project Spotlight: Shop Floor Coating Installation in Marsing, Idaho

Last Updated: September 5, 2025

A high-performance floor system for a large 2,400 sq. ft. shop


We recently completed a floor coating project in Marsing for a homeowner with a spacious 2,400 sq. ft. shop. With a space this large, the homeowner needed a floor that could handle heavy use, resist staining, and still look professional. They reached out to Spray ’n Coat Painting for a better-than-epoxy solution that would be durable, easy to maintain, and visually appealing.


Here’s What We Did


Surface Prep and Grinding: We started by diamond grinding the entire shop floor to open up the concrete and create a proper surface for adhesion. Any imperfections were repaired to ensure the coating bonded securely.


Base Coat and Decorative Flake: Once the surface was prepped, we applied our industrial-grade polyurea base coat, followed by a full broadcast of our popular Keystone chip blend. This decorative flake system not only adds traction but also provides a clean, modern look that complements a wide range of shop uses.


Protective Topcoat: To finish, we installed a UV-stable polyaspartic topcoat. This protective layer seals everything in, delivering long-term resistance against abrasions, chemicals, and Idaho’s extreme temperature swings, while also making the floor much easier to clean.

Project Impact and Benefits


With the new coating in place, the shop now has a professional-grade floor that combines strength, safety, and style. The Keystone blend adds a touch of character, while the system itself ensures the floor can stand up to years of heavy equipment, vehicles, and daily use. Instead of dealing with dust and stains on bare concrete—or the peeling problems that often come with standard epoxy—the homeowner now has a shop floor built for performance and longevity.


We’re proud to provide expert shop and garage floor coatings in Marsing, Nampa, Boise, Meridian, Eagle, and across the Treasure Valley. Contact us today or fill out our request form to schedule a free on-site estimate.

October 2, 2026
Newly painted cabinets need a little extra care while the finish cures. Learn how to handle, clean, and protect your cabinets during the first few weeks after painting.
October 2, 2026
Previously painted cabinets can often be painted again if the existing finish is still sound. Learn how peeling, brush marks, grease, and poor adhesion affect refinishing.
October 2, 2026
Oak cabinet grain can still show through paint depending on the prep and finish you choose. Learn how grain filling, sanding, and professional refinishing affect the final look.
October 2, 2026
Cabinet finishes often wear first near sinks, dishwashers, and stoves. Learn how moisture, steam, grease, cleaning, and daily use affect cabinets.
October 2, 2026
Cabinet boxes can still have years of life even when the kitchen looks dated. Compare painting, refacing, and new doors to see which update makes the most sense.
October 2, 2026
Most cabinets can be painted, but the material and condition make a big difference. Learn how oak, maple, MDF, veneer, laminate, thermofoil, and previously painted cabinets respond to refinishing.
October 2, 2026
Fresh wall paint can make worn trim and interior doors stand out. Learn when repainting them improves the room and when leaving them alone can save money.
October 2, 2026
Ceilings do not always need to be repainted when the walls are. Learn when stains, repairs, fading, or a new wall color make repainting worth it.
October 2, 2026
Older homes can need more preparation before repainting. Boise homeowners can learn what to check with walls, trim, old paint layers, repairs, and possible lead paint.
October 2, 2026
Paint touch-ups can stand out because of fading, sheen, texture, old paint, or application differences. Learn when repainting the full wall gives a better result.
More Posts