A Fresh Pastel Green Update in Nampa
September 5, 2025
Full exterior repaint brings new life to a Nampa neighborhood home
At Spray ’n Coat Painting, we know that color can completely change how a home feels. For this Nampa homeowner, it was time to say goodbye to the dated tan and bring in something brighter and more cheerful. A full exterior repaint in a fresh pastel green paired with crisp ultra-pure white trim gave this home a lively new look while still feeling timeless in the neighborhood.
The Scope
Complete exterior repaint with repairs and prep
This project involved a full repaint of the siding, trim, fascia, soffits, gutters, downspouts, and doors. Before painting, our crew filled holes along the right side of the home where an old cable had been removed, reinstalled the dryer vent, and backrolled the entire bottom edge of the home for smooth, even coverage.
The System
Durable coatings and careful prep for lasting results
We applied pastel green as the body color, matching the soffits, front door, garage doors, and man doors to keep a clean, consistent look. The window trim, fascia, and gutters were finished in ultra-pure white for a bright, modern contrast. To ensure proper adhesion, we also primed the factory-finished gutters before painting.
View more
The Impact
Bright, cheerful, and ready to last
The updated pastel green with white trim instantly refreshed this home’s curb appeal and made it stand out beautifully in the Nampa neighborhood. With the proper prep and priming, this finish will hold strong against the elements for years to come.
We provide expert exterior painting services in Nampa, Boise, Meridian, Eagle, and throughout the Treasure Valley. Contact us today or fill out our
request form to schedule a free on-site estimate.
A high-performance floor system for a large 2,400 sq. ft. shop We recently completed a floor coating project in Marsing for a homeowner with a spacious 2,400 sq. ft. shop. With a space this large, the homeowner needed a floor that could handle heavy use, resist staining, and still look professional. They reached out to Spray ’n Coat Painting for a better-than-epoxy solution that would be durable, easy to maintain, and visually appealing. Here’s What We Did Surface Prep and Grinding: We started by diamond grinding the entire shop floor to open up the concrete and create a proper surface for adhesion. Any imperfections were repaired to ensure the coating bonded securely. Base Coat and Decorative Flake: Once the surface was prepped, we applied our industrial-grade polyurea base coat, followed by a full broadcast of our popular Keystone chip blend. This decorative flake system not only adds traction but also provides a clean, modern look that complements a wide range of shop uses. Protective Topcoat: To finish, we installed a UV-stable polyaspartic topcoat. This protective layer seals everything in, delivering long-term resistance against abrasions, chemicals, and Idaho’s extreme temperature swings, while also making the floor much easier to clean.
A sleek cabinet makeover with soft-close upgrades and a professionally painted finish When this Meridian homeowner reached out, they had already attempted to repaint their kitchen cabinets on their own—but weren’t happy with how things were turning out. They knew they wanted a crisp, professional look and upgraded functionality. That’s where our cabinet refinishing team stepped in. We refinished all 16 cabinet doors and 14 drawer fronts in a rich charcoal hue, paired with new soft-close micro hinges to give the entire space a polished, high-end feel. The darker tone added contrast and elegance, creating the elevated finish they had originally envisioned. The Scope A full kitchen cabinet repaint with soft-close hardware installation This project included: 16 cabinet doors 14 drawer fronts Removal of old hinges and installation of new soft-close micro hinges All surfaces were cleaned, sanded, primed, and professionally sprayed using our factory-grade cabinet finish system for long-term durability and a beautiful satin sheen. The System A smooth, durable finish designed for everyday use We used a premium 2K waterborne polyurethane system from Gemini that cures harder and holds up better than traditional lacquer finishes. Unlike pre-cat lacquers or conversion varnishes that may yellow or crack over time, this cabinet-grade system resists chipping and stays looking new for years to come.
When CS Beef Packers reached out about coating specific walkways and restroom entry points in their Kuna facility, the priority was clear—improving safety and durability in areas exposed to constant foot traffic. This fast-paced industrial environment required a non-slip solution that could be installed quickly without compromising performance. We were glad to deliver a clean, safe, and long-lasting result. The Scope Strategic surface coating in hallways and entry areas This commercial floor coating project focused on two main hallway sections of approximately 100 square feet each , along with four restroom/locker room entry areas , ranging from 50–65 square feet per section. Our team completed all work in a single Saturday , carefully stopping at natural breaks in the concrete for a seamless finish that blended well with the surrounding flooring. The System Industrial-grade coating built for traction and longevity To ensure long-term adhesion and optimal performance, we followed a multi-step process designed specifically for non-slip protection in commercial environments: Surface Prep : Concrete was aggressively sanded and ground to remove all existing coatings, wax, and surface contaminants. Epoxy Primer/Base Coat : A base layer of epoxy was applied directly to the bare concrete for strong bonding and as the foundation of the system. Quartz Broadcast : We applied a full broadcast of 50/70 mesh quartz sand into the wet epoxy to create a high-traction, textured surface. Topcoat : The system was completed with a light grey epoxy topcoat for added durability, visual clarity, and easy maintenance.
Learn how a Boise commercial painting contractor uses durable paints, coatings, and maintenance services for high-traffic commercial interiors.
Discover the ROI of repainting your commercial building with a Boise commercial painter. Learn how commercial interior painting boosts value and appeal.
Learn how a Boise commercial painting contractor meets OSHA safety standards during painting and coating projects for safe, reliable, and professional results.
Learn the key differences between commercial and residential painting. Discover why hiring a commercial painter in Boise makes sense for business owners.
Spray ’n Coat Painting recently completed a wood door refinishing project for a homeowner in Middleton, Idaho. Over time, their beautiful solid wood front door had faded and weathered from sun exposure—something we see often across the Treasure Valley. But rather than replace the door, the homeowner reached out to us to restore its appearance and match the interior wood tones for a cohesive look inside and out. Here’s What We Did We began by carefully sanding the front door and surrounding trim to remove the worn finish and prepare the surface for new stain. Before proceeding with the full application, we tested a sample stain on a small section of the door to make sure it matched the interior tones. Once approved by the homeowner, we applied stain across the entire door surface while keeping the door in place. After allowing proper dry time, we returned to apply two coats of a UV-stable clear finish. This protective layer will help preserve the color, protect against sun damage, and keep the door looking beautiful for years to come. Why Staining Is Better Than Replacing Many homeowners assume a worn or faded door needs to be replaced—but most solid wood doors just need the right restoration process. Staining not only revives the wood’s natural beauty, but also allows you to better control color tone and finish. It’s a more sustainable and cost-effective way to maintain curb appeal and protect your home’s entryway. Our UV-stable clear coats are especially important in areas like Middleton, where intense sunlight can break down traditional sealants and finishes over time.
Spray ’n Coat Painting recently had the pleasure of working with Tamara Michel to refresh the interior of her beautiful family home in Eagle, Idaho. Like many of our customers, Tamara was referred by a friend who had recently completed a project with us—and we were honored to help her bring a new sense of light and warmth into her home. Her walls were previously painted in a creamy yellow that had started to feel outdated and overly warm, especially alongside her natural wood cabinetry. After reviewing color options, Tamara chose one of our most recommended interior shades— Sherwin-Williams Alabaster (SW 7008) —to brighten and modernize the space while still complementing the home’s existing features. Here’s What We Did: We painted the walls throughout the main level using Sherwin-Williams Alabaster in a satin/eggshell finish , a choice that helped reflect natural light while maintaining a soft, elegant look. This project included the: Living room Kitchen and dining area Hallways Stairway Powder bath Laundry room Master bedroom, bathroom, and water closet Each room was carefully prepped and painted to create a clean, cohesive result that enhanced the natural beauty of the space without overwhelming it. Why Alabaster Was the Perfect Fit Alabaster is one of those rare paint colors that manages to be both warm and neutral at the same time. Named Sherwin-Williams Color of the Year in 2016, it has remained a best-seller thanks to its versatility and timeless appeal. In Tamara’s case, Alabaster helped tone down the yellow hues in her natural wood cabinetry , something that the previous wall color had unintentionally amplified. The new wall color created a beautiful contrast that softened the overall look of the space while still feeling warm and welcoming.
